Snappic’s GlamBot VideoFX Templates let you produce stunning, red-carpet-style slow-motion effects using high-speed video capture. These templates are designed to work seamlessly with supported devices and cameras that record at 180–240 fps, creating ultra-smooth playback at up to 1/8x speed.
Table Of Contents
Important Notes
Device Compatibility
Master Settings Requirements
GlamBot Templates Overview
MultiZoom
FastZoom
DoubleSlowMo
Editing and Customization Tips
Need Help? Contact Support
Important Notes
Each GlamBot template uses a recording time of 2–3 seconds and produces a final output between 8–11 seconds.
All templates utilize slow-motion playback (1/8x speed) for a cinematic effect.
You can modify these templates to suit your event’s specific style or pace using the Snappic VideoFX Builder.
Device Compatibility
To achieve the smoothest slow-motion results, use a device or camera capable of recording at 180–240 fps:
✅ Supported Devices
iPhone 11 and later (rear camera with 8× slow motion)
iPad Pro 2020 and later (rear camera with 8× slow motion)
GoPro (models supporting high frame rate capture)
Canon DSLRs / Mirrorless:
Canon R6 Mark II & R8 (180 fps)
Canon R5 Mark II (240 fps)
Canon R3 (240 fps)
💡 Other high-frame-rate cameras may also work, but results vary depending on lighting and exposure settings.
Master Settings Requirements
Before using any GlamBot template:
Open your event’s Master Settings page in Snappic.
Set the Output Frame Rate to 30 fps.
Ensure your recording device supports high-frame-rate capture (180–240 fps).
GlamBot Templates Overview
MultiZoom
🎥 Recording Time: 2 seconds
🎬 Output Duration: 8 seconds
Effect Breakdown:
First 1 second plays at 1× speed (0–1 sec).
Second second plays in 1/8× slow motion (1–2 sec).
The slow-motion section includes a multi-zoom keyframed effect with a slight delay for smooth cinematic movement.
How to Edit:
Open the VideoFX Builder.
Go to the Timeline tab.
Select the app recording number 4, then apply the Multi-Zoom effect.
FastZoom
🎥 Recording Time: 2 seconds
🎬 Output Duration: 8 seconds
Effect Breakdown:
1 second at 1× speed (0–1 sec).
4 seconds in 1/8× slow motion (1–2 sec).
A Pan and Zoom effect is applied to the slow-motion segment, again with a slight keyframe delay for dramatic emphasis.
How to Edit:
In VideoFX Builder, open the Timeline tab.
Select the app recording number 4.
Add or adjust the Pan and Zoom effect as desired.
DoubleSlowMo
🎥 Recording Time: 3 seconds
🎬 Output Duration: 11 seconds
Effect Breakdown:
First 0.7 seconds at 1× speed (0–0.7 sec).
Next 4 seconds at 1/8× slow motion (1–2 sec).
This sequence repeats once, producing two slow-motion moments for a looping cinematic style.
Customization:
While effects can’t be layered directly within this template by default, you can still add additional transitions, filters, or overlays via the VideoFX Builder.
Editing and Customization Tips
Use consistent lighting to prevent flicker during slow-motion playback.
For best results, ensure subjects are well-lit and framed tightly for dramatic motion.
Experiment with keyframing zoom and pan movements to control focus timing.
Always preview your output before finalizing your template.
💡 GlamBot effects look best with bold movement—encourage guests to flip hair, spin, or strike a pose for maximum impact.
Need Help? Contact Support
Visit the Snappic Help Center
Chat directly from your Snappic Dashboard for live 24/7 support.