Setting up your AirCastPro
Airprint is a great solution to make printing at an event much simpler and with less equipment to carry around.
Getting Started with AirCastPro
Are you trying to run an event with your AirCastPro device in order to air print? Use the steps outlined below to complete the initial setup of your device.
Steps to follow:
Watch this "How-to" video from AirCastPro to set up strip printing.
If you are using the latest build (350), then you can just enable “Fill the Print Area” and this will size your 2x6 strips correctly.
To note: if you are using an older version then make sure that if you do want to print strips at your event (2x6 or 6x2 ) then you will need to enable the "Bypass Imaging Engine" option for your printer (see below image on how to enable this option).
Once you have completed the initial setup of your AirCastPro device then you can move forward and connect the Snappic App.