This guide walks you through connecting a GoPro to the Snappic app. Follow the steps in order: this is the setup that works most reliably. A wired connection is highly recommended for better stability, faster transfers and easier Internet access.
Important Notes
LiveView is not supported with GoPro.
Supported models: GoPro Hero 9, 10, 11, 12 and 13. Older models like the GoPro 7 or 8 are not compatible.
The Hero 9 only supports a wireless connection, so we recommend the Hero 10 or newer, which support both wired and wireless.
Snappic app version 1.27.0 or later, on iOS / iPadOS 15 or later (from app version 1.42).
Recommended Camera Settings
Set Resolution: 1080p
Set FPS: 240fps (important for smooth slow motion)
Apply the settings in the Snappic app for both Video and Slow Motion modes to avoid dropped frames.
Connect Your GoPro
Tap a step to open it.
Step 1: Prepare Your GoPro
Step 1: Prepare Your GoPro
Reset the GoPro to factory settings (recommended for first-time setup).
Download and install the GoPro Quik App on the iPad or iPhone you will use with Snappic.
Pair your GoPro with the Quik App, give it a custom name, and test Enable Preview (this checks the Wi-Fi connection works).
Leave the GoPro on the Quik App connection screen before switching to Snappic.
Turn on Quik App pairing mode by model (may differ with GoPro firmware updates)
Hero 9: Swipe down → left → Connections → Connect Device → Quik App.
Hero 10: Swipe down → left → Connections → Connect Device → GoPro Quik App.
Hero 11: Swipe down → left → Preferences → Wireless Connections → Connect Device → GoPro Quik App.
For other models, see Get a GoPro Camera Ready for Connection.
Step 2: Choose a Wired or Wireless Connection
Step 2: Choose a Wired or Wireless Connection
Wired (recommended)
More stable and faster, and it keeps your Wi-Fi free for Internet access.
Depending on your iPad or iPhone, you may need an adapter (a Lightning to USB adapter) or a USB-C to USB-C cable. See GoPro Wired Connection for which adapter you need and how to keep your device charged.
Use a cable that supports data transfer, not just charging.
You can't charge the GoPro while it's connected by cable, so bring spare batteries.
Wireless
The only option for the Hero 9.
Your iPad or iPhone joins the GoPro's Wi-Fi, so there's no Internet while connected unless you use mobile data.
Step 3: Connect in the Snappic App
Step 3: Connect in the Snappic App
Open Snappic.
Go to your event → tap Configure Camera → Search for GoPro Camera.
Make sure Bluetooth is on (needed for both wired and wireless), and the GoPro is powered on and nearby.
Select your GoPro from the list. For a wired connection, wait a few moments until the Wired Connection symbol (highlighted in red below) shows next to the GoPro before you select it.
Wireless only: accept the prompts to join the GoPro's network.
Your GoPro is now connected.
Video Tutorial
Video Tutorial
Troubleshooting
Troubleshooting
Close the GoPro Quik App on your iPad or iPhone before connecting with Snappic (the GoPro itself can stay on the Quik App connection screen).
Keep your GoPro firmware up to date.
Turn on Bluetooth and Local Network permissions for Snappic (Settings → Snappic).
Wired: check the cable supports data transfer, not just charging.
Still not connecting? Restart both the iPad or iPhone and the GoPro, or reset network settings.
Full guide: GoPro Troubleshooting
Need Help? Contact Support
Still stuck? Send us a message in the chat with your GoPro model, iPad or iPhone model and Snappic version.
Visit the Snappic Help Center
Chat directly from your dashboard for live support



